Có những lệnh nào kiểm tra thông số CPU trên Linux?

Có những lệnh nào kiểm tra thông số CPU trên Linux?

1. Lấy thông tin CPU bằng cat

Có thể xem thông tin của của CPU bằng cách xem nội dùng của file /proc/cpuinfo bằng lệnh sau:

$ cat /proc/cpuinfo
Linux CPU Information
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 69
model name	: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
stepping	: 1
microcode	: 0x1c
cpu MHz		: 1700.062
cache size	: 3072 KB
physical id	: 0
siblings	: 4
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 13
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts
bugs		:
bogomips	: 4788.92
clflush size	: 64
cache_alignment	: 64
address sizes	: 39 bits physical, 48 bits virtual
power management:
......

Muốn lấy thông tin cụ thể có thể kết hợp với lệnh grep. Vd muốn lấy thông tin của vendor, model, số lượng cpu, số core...:

$ cat /proc/cpuinfo | grep 'vendor' | uniq		#view vendor name
$ cat /proc/cpuinfo | grep 'model name' | uniq		#display model name
$ cat /proc/cpuinfo | grep processor | wc -l		#count the number of processing units
$ cat /proc/cpuinfo | grep 'core id'			#show individual cores	

2. Lệnh lscpu - Xem kiến trúc của CPU

Lệnh lscpu in ra kiến trúc của CPU từ sysfs và /proc/cpuinfo:

$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 69
Model name:            Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
Stepping:              1
CPU MHz:               1303.687
CPU max MHz:           2700.0000
CPU min MHz:           800.0000
BogoMIPS:              4788.92
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              3072K
NUMA node0 CPU(s):     0-3
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts

3. Lệnh cpuid - Hiển thị CPU x86_64

$ cpuid
CPU 0:
vendor_id = "GenuineIntel"
version information (1/eax):
processor type  = primary processor (0)
family          = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6)
model           = 0x5 (5)
stepping id     = 0x1 (1)
extended family = 0x0 (0)
extended model  = 0x4 (4)
(simple synth)  = Intel Mobile Core i3-4000Y / Mobile Core i5-4000Y / Mobile Core i7-4000Y / Mobile Pentium 3500U/3600U/3500Y / Mobile Celeron 2900U (Mobile U/Y) (Haswell), 22nm
miscellaneous (1/ebx):
process local APIC physical ID = 0x0 (0)
cpu count                      = 0x10 (16)
CLFLUSH line size              = 0x8 (8)
brand index                    = 0x0 (0)
brand id = 0x00 (0): unknown
feature information (1/edx):
x87 FPU on chip                        = true
virtual-8086 mode enhancement          = true
debugging extensions                   = true
page size extensions                   = true
time stamp counter                     = true
RDMSR and WRMSR support                = true
physical address extensions            = true
....

4. Lệnh dmidecode - Xem thông tin phần cứng

dmidecode là công cụ lấy thong tin phần cứng của bất kỳ hệ thống Linux nào. dmidecode kết xuất thông tin từ computer's DMI (SMBIOS) để hiển thị thành dạng thành dạng thông tin có thể đọc được. Vd để lấy thông tin của CPU :

$ sudo dmidecode --type processor
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: U3E1
Type: Central Processor
Family: Core i5
Manufacturer: Intel(R) Corporation
ID: 51 06 04 00 FF FB EB BF
Signature: Type 0, Family 6, Model 69, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
.....

5. Inxi Tool - Xem thông tin hệ thống Linux

Cài đặt:

$ sudo apt install inxi 	#Debian/Ubuntu systems
$ sudo yum install inxi		#RHEL/CentOS systems 
$ sudo dnf install inxi		#Fedora 22+ 

Để hiển thị toàn bộ thông tin của CPU, bao gồm xung nhịp của mỗi CPU và max speed, làm như sau:

$ inxi -C
CPU:       Dual core Intel Core i5-4210U (-HT-MCP-) cache: 3072 KB 
clock speeds: max: 2700 MHz 1: 1958 MHz 2: 1993 MHz 3: 1775 MHz 4: 1714 MHz

6. lshw Tool - Xem cấu hình phần cứng

lshw có thể thu thập chi tiết thong tin phần cứng. Vd để xem CPU:

$ sudo lshw -C CPU
*-cpu                   
description: CPU
product: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
serial: To Be Filled By O.E.M.
slot: U3E1
size: 2626MHz
capacity: 2700MHz
width: 64 bits
clock: 100MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts cpufreq
configuration: cores=2 enabledcores=2 threads=4

7. hardinfo - Xem cáu hình phần cứng bằng giao diện GTK+

Cài đặt:

$ sudo apt install hardinfo 	#Debian/Ubuntu systems
$ sudo yum install hardinfo	#RHEL/CentOS systems 
$ sudo dnf install hardinfo	#Fedora 22+ 

Sử dụng:

$ hardinfo

Có những lệnh nào kiểm tra thông số CPU trên Linux? (1)

Công cụ còn hỗ trợ export ra file HTML

Có những lệnh nào kiểm tra thông số CPU trên Linux? (2)

Có những lệnh nào kiểm tra thông số CPU trên Linux? (3)

8. hwinfo - Hiển thị thông tin phần cứng hiện tại

Để xem thông tin CPU:

$ hwinfo --cpu
01: None 00.0: 10103 CPU                                        
[Created at cpu.460]
Unique ID: rdCR.j8NaKXDZtZ6
Hardware Class: cpu
Arch: X86-64
Vendor: "GenuineIntel"
Model: 6.69.1 "Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz"
Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4_1,sse4_2,movbe,popcnt,tsc_deadline_timer,aes,xsave,avx,f16c,rdrand,lahf_lm,abm,epb,tpr_shadow,vnmi,flexpriority,ept,vpid,fsgsbase,tsc_adjust,bmi1,avx2,smep,bmi2,erms,invpcid,xsaveopt,dtherm,ida,arat,pln,pts
Clock: 2080 MHz
BogoMips: 4788.92
Cache: 3072 kb
Units/Processor: 16
Config Status: cfg=new, avail=yes, need=no, active=unknown
....

9. nproc - In ra số lượng vi xử lý

nproc sẽ hin ra số lượng vi xử lý hiện tại của máy tính

$ nproc

Để lấy thêm thông tin và options, dùng lệnh sau:

man nproc

Chúc bạn thành công!

Nguồn: viblo

Mọi người cùng tìm kiếm: check cpu linux, check core cpu linux, cpu info linux, check cpu info linux, cpu check linux, cpu id linux, cat cpu info, check cpu ubuntu, check linux cpu, cat /proc/cpuinfo, check cpu info, check linux cpu info, cpu infor, cpu vendor genuineintel